Ariens ST270 Snow Blower Manual
The Ariens ST270 is a powerful snow blower designed for efficient snow removal. It features a 27-inch clearing width, a reliable 254cc engine, and a durable construction that ensures long-lasting performance. This manual provides essential information on safety, operation, maintenance, and troubleshooting to help you get the most out of your snow blower.
Features at a Glance
The Ariens ST270 comes equipped with several features designed to enhance performance and ease of use:
- Clearing Width: 27 inches for efficient snow removal.
- Engine: 254cc Ariens engine for reliable power.
- Transmission: 6 forward and 2 reverse speeds for optimal control.
- Auger System: Heavy-duty steel auger for effective snow cutting.
- Chute Control: Remote chute adjustment for directional control.
Safety Information
Before operating the snow blower, please read and understand the following safety precautions:
- Always wear appropriate clothing and safety gear.
- Keep hands and feet away from moving parts.
- Do not operate in enclosed spaces.
- Ensure proper maintenance is performed regularly.
- Read the manual thoroughly before use.
Assembly Instructions
Follow these steps to assemble your Ariens ST270 snow blower:
- Unpack the snow blower and check all parts against the parts list.
- Attach the handle assembly to the main unit using the provided hardware.
- Install the chute and adjust it according to the instructions.
- Fill the fuel tank with the recommended fuel type.
- Check oil levels and add oil if necessary.
Operating Instructions
To operate the Ariens ST270 snow blower, follow these steps:
- Start the engine according to the instructions in the manual.
- Adjust the throttle and speed settings as needed.
- Direct the chute to control the snow discharge direction.
- Clear snow in a systematic pattern for best results.
- Shut off the engine and allow it to cool before performing maintenance.
Maintenance
Regular maintenance is essential for optimal performance:
- Check and change the oil regularly.
- Inspect the spark plug and replace if necessary.
- Clean the auger and chute after each use.
- Store the snow blower in a dry place during off-season.
- Refer to the manual for detailed maintenance schedules.
Troubleshooting
| Symptom | Possible Cause | Corrective Action |
| Engine won't start | No fuel | Check fuel level and fill if necessary. |
| Snow blower not clearing | Clogged auger | Stop the machine and clear the auger. |
| Strange noises | Loose parts | Inspect for loose bolts and tighten as needed. |
| Chute not adjusting | Mechanical failure | Check chute control mechanism for damage. |
Specifications
- Model: Ariens ST270
- Engine: 254cc Ariens
- Clearing Width: 27 inches
- Weight: Approximately 200 lbs
- Fuel Capacity: 2.5 gallons
Warranty Information
The Ariens ST270 comes with a limited warranty. Please refer to the warranty section in the manual for details on coverage and duration.
Ariens ST270 Snow Blower Manual © - All Rights Reserved 2026